<- Smaller Size


Valve is normally open. Valve body has a 7.0 inch inlet OD and 11 inch OD outlet flange sized to adapt to a 4 or 8 bolt pattern. The inlet and outlet are in line. The poppet seals with special Teflon o-ring mounted in the body. Valve material is an aluminum body, aluminum poppet and piston with steel main spring and stainless steel poppet spring. The valve has an independent poppet to prevent back flow during operation and at shutdown.


The rated pressure drop is 5.6 in_wtr (1.4 kPa) @ 1100 scfm (31.1m³/min) airflow.  Here a scfm is one cubic foot per minute of air at 14.696 psia (1.01325 bara), 60°F (15.555°C) and 0.0% relative humidity.


Body Base
  • No o-ring
  • 265 o-ring
  • NPT
  • BSPT
  • ORB
Modulation Pressure Range
25 psig (1.7 barg) to 40 psig (2.8 barg)
Poppet Type
  • TFE with backing ring: Rated at 250 psig, 250°F (17.2 barg, 121°C)
Body Finish
  • Bare
  • Anodized
Internal Aluminum Finish
  • Bare
  • Anodized

View PDFView STEPView Maintenance


1) Valve can have auxiliary ports on the outlet side of the poppet
2) Valve can be ordered as a low pressure check valve. The main spring is removed, stroke set and the poppet spring is set to meet customer requirements.